3. Remove the old fuse from its holder by gently pulling it out.
4. Install the new fuse into the holder.
5. Always use a fuse of the proper size and value
mA-range: 500mA/690V (10,3 x 38mm) fast blow
10A-range: 10 A/690V (10,3 x 38mm) fast blow
6. Put the back case back in place. Insert the screws and
tighten it securely.
Warning:
To avoid electric shock, do not operate your meter until the back
cover and the back case is in place and fastened securely.
6.3. Care
*
Get in the habit of double checking the position of the switch
before making a measurement. The meter can be burned
out by applying voltage when the switch is set on the current
or ohms range.
*
If the unit has not been in use for a long period of time,
rotating the switch in both direction several times will wipe
the contacts for a good and clean connection.
Statutory Notification about the Battery Regulations
The delivery of many devices includes batteries, which for
example serve to operate the remote control. There also could
be batteries or accumulators built into the device itself. In
connection with the sale of these batteries or accumulators, we
are obliged under the Battery Regulations to notify our
customers of the following:
-31-
