6.9. Checking Continuity
Follow these steps to check a circuit’s continuity.
1. Set the rotary selector to
2.
Plug the black test lead into your meter’s COM terminal and
the
red test lead into your meter’s V/
/Hz/-terminal.
3. Remove power from the circuit.
4. Connect the test leads to the circuit.
Note:
The buzzer sounds if the measured resistance is below about
30
approximately.
Warning!
Never perform a continuity measurement on a circuit that has
power connected.
-66-
+
-
Summary of Contents for 2180
Page 1: ...Bedienungsanleitung Operation manual DMM LCR Meter PeakTech 2180 ...
Page 20: ...V DC 19 ...
Page 55: ...V DC 54 ...
