6. Measuring Procedure
For safety consideration, before the measurement,
should disconnect (power off) the power supply of the
measurement circuit.
1.) Determine
before
the
measurement
the
prospective voltage/current
2.) Connect the test leads with the appropriate input
sockets of the measuring range of the ED-205.
Note: The measuring range are characterized on the
input sockets by the appropriate value.
3.) Connect the test leads with the measuring circle
you want to test and switch on the power
supply.
This manual considers the latest technical knowing.
Technical changings which are in the interest of
progress reserved.
We herewith confirm, that the units are calibrated by
the factory according to the specifications as per the
technical specifications. We recommend to calibrate the
unit again, after 1 year.
© PeakTech
®
11/2012/Th/Ho/pt.
PeakTech Prüf- und Messtechnik GmbH - Kornkamp 32 –
DE-22926 Ahrensburg / Germany
+49-(0) 4102-42343/44 +49-(0) 4102-434 16
[email protected] www.peaktech.de
Summary of Contents for 205
Page 8: ...5 Anschlüsse 7 ...
Page 9: ... 8 ...
Page 16: ...5 Test Leads Connections 15 ...
Page 17: ... 16 ...
