PeakTech 1200, Operation Manual

Page: 73 / 73

Appendix D: Battery Using Guide
Charging the oscilloscope
The lithium battery maybe not be charged when delivery. Please charge the battery for 12 hours to
make sure enough power to supply (the oscilloscope should be turned on during charging) to
oscilloscope. The battery can supply power for 4 hours after being charged completely.
There will have power indication show on the top of panel when oscilloscope power supplied by the
battery. , , and , imply for different power consumption and when shows it means the power
can only supply for 5 minutes maximum.
Note:
To avoid superheat of battery during charging, the environment temperature is not allowed to
exceed the permissible value given in technical specification.
Replacing the Lithium Battery Unit
It is usually not required to replace the battery unit. But when it is required to replace it, only
qualified personnel can carry out this operation, and only use the same specification lithium battery.
All rights, also for translation, reprinting and copy of this manual or parts are reserved.
Reproduction of all kinds (photocopy, microfilm or other) only by written permission of the
publisher.
This manual considers the latest technical knowing. Technical changings which are in the interest of
progress reserved.
We herewith confirm, that the units are calibrated by the factory according to the specifications as
per the technical specifications.
We recommend to calibrate the unit again, after 1 year.
©
PeakTech
®
02/2008/Th
- 72 -