13
Introduction
Introduction
The following guide will take you through the steps of setting up a TCS AVE door station in
connection with a PEAKnx touch panel.
■
Please make sure that the PEAKnx touch panel receives an IP address and is connected to
the same local network your TCS AVE door station is connected to.
■
Internet access for the panel is required to use a VioP software.
■
Set up the TCS outdoor station according to the supplied instructions.
1 Setting up the VoIP communication
1.1 Option 1: Setting up the YOUVI door station module
Via the door station module it is possible to integrate SIP intercom systems into the visualiza-
tion. To do this, proceed as follows:
1.
Open the YOUVI Configuration
Dashboard
page via the desktop shortcut or the green
house in the taskbar.
−
You can also reach the configuration page on your browser, as long as you are in the
same network as the PEAKnx touch panel. To do this, enter the following URL in your
browser:
−
http://x.x.x.x:31228
, Where
x.x.x.x
must be replaced by the local IP address of your
PEAKnx touch panel. This is shown to you in the server overview:
2.
Go to „Install Door intercom“.
3.
Under
More > License
, you can view the remaining days of your trial license.
4.
For unlimited use, please purchase the module in the PEAKnx Shop.
