PEAK® IOM57 Input/Output Modules Installation Instructions
1
Application
The PEAK IOM57 field controllers belong to the PEAK Controller family. Input/Output Module (IOM) controllers
expand the number of points that are connected to an OEM SMART Equipment controller (PEAK) to monitor and
control a wide variety of HVAC/R equipment.
PEAK IOM57 field controllers operate on an RS-485 BACnet® MS/TP bus as BACnet Application Specific
Controllers (B-ASCs) and integrate into Johnson Controls® and third-party BACnet systems.
North American Emissions Compliance
United States
Canada
Installation
Observe the following guidelines when you install a field controller:
•
Transport the controller in the original container to minimize vibration and shock damage.
•
Verify that all parts shipped with the controller.
•
Do not drop the controller or subject it to physical shock.
Parts included
•
One controller with removable terminal blocks. Power, sensor actuator (SA), and field controller (FC) bus are
removable.
•
One installation instructions sheet.
Materials and special tools needed
•
Three fasteners appropriate for the mounting surface (M4 screws or #8 screws).
•
One 20 cm (8 in.) or longer piece of 35 mm DIN rail and appropriate hardware for DIN rail mount (only).
•
Small straight-blade screwdriver to secure wires in the terminal blocks.
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when this equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area may
cause harmful interference, in which case users will be required to correct the interference at their own expense.
This Class (A) digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la Classe (A) respecte toutes les exigences du Règlement sur le matériel brouilleur
du Canada.
PEAK® IOM57 Input/Output Modules
Installation Instructions
PK-IOM5711, PK-IOM5731
Part No. 24-10143-985, Rev. C
Issued June 2018
(barcode for factory use only)
*2410143985C*
24-10143-985, Rev. C
