PCAN-MiniDisplay – User Manual
27
File count circular
This value indicates the maximum number of trace files that are
created for a recording of the
Trace type
circular
.
Session type
This setting determines whether the files created for a recording of
the
Trace type
circular
are overwritten or not. The following
options are available:
Single session
With each recording, the file sequence with
the name
trace_xx.btr
is overwritten.
Data
A new sequence of files is created with each recording.
Later, a trace file can be used for playback of the recorded CAN
messages on the CAN bus (see following section 5.2 on page 29).
As an alternative, it is possible to convert the recording on a PC to
another format for further use and for evaluation (see section 5.3 on
page 30).
Note:
A filter may be applied to incoming CAN traffic which
allows only CAN messages with specific IDs to pass through.
See chapter 5.4 on page 32 for details about filtering.
