PCAN-MicroMod Mix 2 – User Manual
13
3.2.2
Installing the Program
Under Windows install the program from the supplied CD. Start the
corresponding installation routine by using the CD navigation going
to
Tools
>
PCAN-MicroMod Configuration 2.5.x
.
3.2.3
Creating a Configuration
When you start creating a new configuration in PCAN-MicroMod
Configuration, the dialog box Board Type appears in order to select
the type of the used motherboard. The necessary settings are
explained in the following.
Figure 6: PCAN-MicroMod Configuration: selection of the Mix 2 motherboard
Board Type
: PCAN-MicroMod Mix 2
Module No
: 0
The module number of the MicroMod on the Mix 2 motherboard is
set to 0 at delivery and is relevant if you want to configure more
than one MicroMod on the same CAN bus. See also section 3.4
Several MicroMods on the CAN Bus
on page 17.
