PCAN-MicroMod Mix 1 – User Manual
8
2.1
Modification on Nominal Supply
Voltages > 12 V
If you want to supply the Mix 1 motherboard with a nominal voltage
+U
b
> 12 V (usually 24 V), then you must do the following
modification:
1.
Equip the unpopulated position D6 with a reference diode
BZV55C12 (package SOD-80).
Figure 2: Position D6 (top side of the PCB)
2.
Replace the 0-Ohm resistor on position R33 with a resistor of
1.6 k
(package S1206).
