background image

 

 

 

 

NM60L- Nitrogen Gas Generator 

UM – NM60L

 

 

 

 

 

Warranties & 

Liabilities

 

 

 

 

Warranties and Liabilities

 

 

1.   The Company warrants that it has title to the Goods. 

 

2.   Subject to the provisions of this clause the Company warrants that the Goods shall comply in all material respects 

with any specification referred to in the Order Confirmation (as the same may be amended) and shall, subject 

thereto, be free from defects in material and workmanship for the lesser of a period of twelve months from the date 

of delivery or thirteen months from the date of dispatch from the factory. 

 

3.   Save as provided in this clause and except where the Goods are sold to a person dealing as a consumer (within 

the meaning of the Unfair Contract Terms Act 1977) all warranties, conditions or other terms implied by statute or 

common law are hereby expressly excluded save to the extent they may not be lawfully excluded.  When the 

Goods are sold to a consumer within the meaning of the Unfair Contract Terms Act 1977 their statutory rights are 

not affected by the provisions of this clause. 

 

4.   In the event of the Customer making a claim in respect of any defect in terms of clause 2 hereof the Customer 

must:- 

4.1. reasonably satisfy the Company that the Goods have been properly installed, commissioned, stored, serviced 

and used and without prejudice to the generality of the foregoing that any defect is not the direct or indirect result 

of  lack  of  repair and/or servicing,  incorrect  repair and/or  servicing,  use of  wrong materials  and/or  incorrect  spare 

parts; and 

4.2. allow the company to inspect the Goods and/or any installation and any relevant packaging as and when 

reasonably required by the Company. 

 

5.   Subject to the Company being notified of any defect as is referred to in sub-clause 2 hereof within a reasonable 

time  of  it  becoming apparent  and  subject  always  to  the  terms  of sub-clause  4  hereof,  the  Company  shall,  in  its 

option, replace or repair the defective Goods or refund a proportionate part of the Price.  The Company shall have 

no further liability to the Customer (save as mentioned in sub-clause 6 hereof). 

 

6.   The Company shall be liable to indemnify the Customer in respect of any claim for death or personal injury to any 

person in so far as such is attributable to the negligence or breach of duty of the Company or any failure by the 

Company to comply with the provisions of sub-clause 2 hereof. 

 

7.   Save as provided in sub-clause 2 hereof the Company shall not be liable in respect of any claim by the Customer 

for  costs,  damages,  loss  or  expenses  (whether  direct,  indirect,  consequential  or  otherwise)  or  indemnity  in  any 

respect howsoever arising including, but not by way of limitation, liability arising in negligence (other than pursuant 

to clause 6 above) that may be suffered by the Customer or any third party. 

 

 

 

SAFETY NOTICE TO USERS

 

These instructions must be read thoroughly and understood before installation and 

operation  of  your  Peak  Scientific  NM60L.  Use  of  the  Generator  in  a  manner  not 

specified by Peak Scientific MAY impair the SAFETY provided by the equipment. 

When handling, operating or carrying out any maintenance, personnel must employ 

safe   engineering   practices   and   observe   all   relevant   local   health   and   safety 

requirements and regulations. The attention of UK users is drawn to the Health and 

Safety at Work Act 1974, and the Institute of Electrical Engineers regulations.

 

 

WARNING: 

Nitrogen  is  not  a  poisonous  gas,  but  if  the  concentration  in  the 

inhaled air becomes too high there will be a risk of asphyxiation.

 

 

 

 

Summary of Contents for NM60L

















Reviews: