Peak MU-Thermocouple1 CAN User Manual Download

Page: 5 / 18

MU-Thermocouple1 CAN – User Manual

1.2

Prerequisites for the Operation

The following prerequisites must be given, so that the measuring
unit can be used properly:

Power supply 12 V DC nominal (6 - 32 V possible), connected via
supplied mating connector

For configuring of the measuring unit via CAN:

Computer with Windows Vista, XP SP2, or 2000 SP4

CAN interface of the PCAN series for the computer (e.g. PCAN-
USB or PCAN-PCI)

Installed device driver for the CAN interface

CAN connection between the computer and the measuring unit

1.3

Scope of Supply

The scope of supply normally consists of the following parts:

Measuring unit MU-TC1 CAN in an aluminum casing

Mating connector for the power supply

CD with software and documentation

Summary of Contents for MU-Thermocouple1 CAN



















Search results

Summary of Contents for MU-Thermocouple1 CAN

Reviews:

Related manuals for MU-Thermocouple1 CAN

Brands by name

Popular brands

Peak MU-Thermocouple1 CAN, User Manual

Search results

Summary of Contents for MU-Thermocouple1 CAN

Reviews:

Related manuals for MU-Thermocouple1 CAN

Brands by name

Popular brands