Peak IPEH-003001 User Manual Download Page 29 | Manualshive

Page: 29 / 29

Peak IPEH-003001 User Manual Download Page 29

PCAN-ExpressCard – User Manual

29

Appendix C

Quick Reference

Software/Hardware Installation under Windows

Before connecting the PCAN-ExpressCard to the computer set up
the corresponding software package from the supplied DVD (with
administrator privileges). Afterwards insert the card into a
ExpressCard slot of the computer. The card is recognized by
Windows and the driver is initialized. After the installation process
is finished successfully, an LED is on for each CAN channel of the
card.

Getting Started under Windows

Run the CAN monitor PCAN-View from the Windows Start menu as
a sample application for accessing the PCAN-ExpressCard. For
initialization of the card select the CAN connection and the CAN bit
rate.

Status LED

Meaning

On

There's a connection to a driver of the operating system.

Slow blinking

A software application is connected to the CAN channel.

Quick blinking

Data is transmitted via the connected CAN bus.

High-speed CAN connector (D-Sub, 9 pins)

«
...
27
28
29

Summary of Contents for IPEH-003001






























Reviews:

No comments