The Brado – simple and user-friendly
Up / unfold 1. rollator
Place the rollator in the direction of travel and actuate the parking break.
Print with both hands the side tubes of the seat surface left and right
down to the folding mechanism locks into place.
Only then mesh pocket, bag or basket in the throw holder provided
hang.
2. Adjust handle Height
Solve urn set screw 5-6 turns (the screw must not be out completely)
and set the desired height by pushing in or pulling the push handles.
The push handles latch into increments of 25 mm.
Turn the locking screw again. The locking screw must not be
tightened between the predetermined locking positions. After
tightening, the screw can be accommodated by pulling in a
vertical position, thereby interfering less.
between the predetermined locking positions. After tightening the
3. Brake
Service Brake (when pushing):
Pull the lever up.
Fasten the break (for parking):
You push the lever down.
4. Brake Adjustment
The brake is correctly adjusted, even if the brake levers like those
Bowden cables a play do not exhibit themselves and the wheels without
sharpening noises to turn leave.
The braking action can be set using the adjusting screw of the
Bowden cable to the brake pads the rear wheels.
5. Climbing
Raising the steering wheels is relieved by applying pressure with the toe
the prolonged so frame.