Atlas
LCR45
User Guide
January 2019 – Rev 4
Page 20
Taking care of your LCR45
Battery Replacement
The LCR45 requires no special maintenance
although the battery should be replaced every 12
months to prevent leak damage.
If this message is displayed, the battery
should be replaced as soon as possible to
prevent malfunction or leak damage.
Although the unit may continue to operate following a low battery warning,
measurements may be adversely affected.
New batteries can be purchased from many retailers and directly from Peak
Electronic Design Ltd or an authorised agent.
Battery types:
Suitable battery types include 23A, V23A, GP23A, MN21,
L1028 or a good quality 12V alkaline equivalent as used in many test
instruments and automotive remote key fobs.
Battery access:
To replace the battery, unscrew the three screws to remove the
rear panel. Remove the old battery and insert a new one, taking care to
observe the correct polarity. Carefully replace the rear panel, do not over-
tighten the screws.
