1
st
red light flash
indicates the pressure of battery is not full.
2
nd
red lights flash
indicates no signal
to
joystick.
3
rd
red lights flash
indicates the wheelchair is charging.
4
th
red lights flash
indicates sufficient power to operate.
5
th
red lights flash
indicates the brake solenoid is not
connected or
is
damaged.
DIAGNOSTICS
Your controller
h
as an indicator light
. D
uring normal operation,
it
is a steady GREEN.
This light also functions as a diagnostic tool by flashing in patterns that indicate
problems. It is important to pay attention to these diagnostics in case the power wheelchair
must be put out of use for safety reasons
and
until maintenance can be performed.
If the indicator light indicates a fault, turn off the power and then turn on power again. If the
fault is not released after turning on power again, the indicator repeats this error mes-
sage. Please refer to the fault information diagnosis table to help you find possible prob-
lems and corresponding solutions.
If the above method still does not help you troubleshoot, please contact your dealer. When
communicating with the dealer, provide the specific problems in detail as much as possible.
18
V20-04-DC01