NM20ZA Service Manual Rev 14
NM20ZA
Service Manual – Revision 13
1
Introduction
Welcome to the Service Manual for the Peak Scientific Instruments NM20ZA Laboratory Gas
Generator. Enclosed in this manual you will find the information required to ensure that your
generator is operated & serviced according to our recommended guide lines which will prepare
you for long and trouble free gas generation.
Please review each of the following sections carefully and ensure that an Operational
Validation Report is completed in full after every service task is performed and that the
maintenance log at the rear of this manual is updated for future reference
(Complete IQ/OQ
procedures are available from the factory)
.
Thank you for selecting
Peak Scientific Instruments (PSI)
to meet your Gas Generation
needs, and should you require any further assistance or support please do not hesitate to
contact us at the addresses displayed on the front cover of this manual.
2
Unpacking and Installation.
Although Peak Scientific takes every precaution with safe transit and packaging, it is advisable to fully
inspect the unit for any sign of transit damage.
ANY DAMAGE SHOULD BE REPORTED IMMEDIATELY TO THE CARRIER AND
PEAK SCIENTIFIC OR THE DISTRIBUTOR FROM WHERE THE UNIT WAS
PURCHASED.
Follow the un-packing instructions posted on the side of the crate. It will require 2 people to lift the crate
clear and to maneuver the generator onto the floor. Thereafter the generator can be moved to its final
location on the castors provided.
Note: -
Included with the generator is a pack containing keys, manuals, service filters &
fittings. Be careful not to discard these with the packing.
Please save the product packaging for storage or future shipment of the
generator.
5
