12
7. PLANT STAND
With your plant attached, socket the vertical stand into the top of the gate
support of the REAR ACCESS MODULE. Adjust the height by removing the
handpiece hook and placing it in another hole
8. DRAFT MODULE
(a)
The air operated drafting gate assembly attaches to the machine in a
similar way to the REAR ACCESS MODULE. Adjust the wheels so it is the
same height as the machine, unlock the “anti-luce” fasteners and align
them into the holes under the DRAFT MODULE base. Lock into place by
flipping the “anti-luce” up.
(b)
Connect the air supply coming from the draft controller to the outlet
on the IMMOBILIZER. The DRAFT CONTROL POST sits over one of the
IMMOBILIZER wheels depending on your position and is tightened with
two wing nuts
FIG.8
FIG.9
Summary of Contents for IMMOBILIZER SHEEP WORKER
Page 2: ......
Page 23: ...23 NOTES...
