manualshive.com logo in svg

Peachtree NOVA, User Manual

Share
Download
Peachtree NOVA User Manual Download Page 14

instructions elsewhere for more detail).  Caution: the volume control in the nova is 

completely bypassed in the volume control bypass mode!

 

 
H

 

AUX-1/HTB Button: This button selects the AUX-1 input and lights the LED blue (or 

green if the Home Theater Bypass mode is engaged - please see the Home Theater 

Bypass  instructions elsewhere for more detail).  Caution: the volume control in the 

nova is completely bypassed in the Home Theater Bypass mode!

 

 
I

 

AUX-2/PHONO Button: This button selects the AUX-2 input and lights the LED blue (or 

green  if the PHONO  input mode is engaged).  PHONO  input mode  is  designed to 

integrate the nova with a Moving Magnet (MM) phonograph/turntable. Note: When in 

PHONO input mode, the input has additional gain and equalization settings applied that 

are specifically designed for MM cartridges. Please note  that when using a 

phonograph/turntable with a Moving Coil (MC) cartridge, this input should be set to 

AUX-2 and an external phono preamp designed specifically for Moving Coil cartridges 

used. Press and hold this button for ~5 seconds to toggle the input between the AUX-2 

(blue LED) and PHONO (green LED) input modes.

 

 
J

  MUTE Button:  Mutes and un-mutes the RIGHT & LEFT Speaker, PREAMP and 

headphone outputs. Note: the currently selected blue or green input LED will flash 

slowly while the unit is muted. 

 
K

 LOOP Button: Engages and disengages the LOOP OUTPUT/LOOP INPUT. Note: The 

LOOP LED on the front panel is lit blue whenever the loop is engaged. 

 
L

 COAX Button: This button selects the COAX input and lights the LED blue (or green if 

the volume bypass mode is engaged - please see the volume control bypass 

instructions elsewhere for more detail). Caution: the volume control in the nova is 

completely bypassed in the volume control bypass mode! 

 

M

 OPT-1 & OPT-2 Button: These buttons select the OPT-1 and OPT-2 inputs and light 

the LED blue (or green if the volume bypass mode is engaged - please see the volume 

control bypass instructions elsewhere for more detail). Caution: the volume control in 

the nova is completely bypassed in the volume control bypass mode!

 

 

N

  Wi-Fi Button:  This  button  selects the Wi-Fi  input  (if the optional Peachtree Wi-Fi 

Module is installed and ignored if it isn’t) and lights the LED blue (or green if the volume 

bypass mode is engaged -  please see the volume control bypass instructions 

elsewhere for more detail).  Caution: the volume control in the nova is completely 

bypassed in the volume control bypass mode! 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for NOVA























Reviews:

No comments

Brands by name

Popular brands

Load more brands