Specifications:
• Acoustic Design:
(2) 1-inch high frequency drivers
(2) 3-inch midrange frequency drivers
(1) 6.5-inch low frequency driver
Acoustically sealed cabinet
• Power Amplifier: 440 Watts
• Inputs:
Wireless network input with direct connection capability
• Wi-Fi 8.2.11 b/g/n (AP/STA modes supported)
• Music Formats supported: MP3, WMA, ACC (ACC+),Apple lossless,
ALAC, FLAC, APE, WAV.
Optical Digital Audio (Toslink)
Line-level Analog Audio (3.5mm)
• Dimensions (H x W x D): 9.1 x 14.2 x 6.5 (inches) / 230 x 360x 164 (mm)
• Weight: 16 pounds / 7.3 kg
• AC Input: 100-240V 50/60Hz
TROUBLESHOOTING & SPECIFICATIONS
“I don’t hear anything playing.”
Make sure the deepblue
SKY
is plugged in and turned on (LEDs lit after buttons are touched).
Check that the correct input is selected; wireless (wireless LED blue), AUX (Input LED lit blue)
or OPT (Input LED lit white).
If the wireless LED is flashing blue, the input is selected but a wireless device is not currently
connected. Check the following next:
Make sure wireless is enabled on your device.
Make sure your wireless device is connected to the same wireless network as the deepblue
SKY
.
Make sure music is playing on your device (not paused) and that the volume on the device
is not muted or set to a very low level. Many devices will pause playback if the wireless
connection is lost.
If AUX is selected, make sure the wired connection is fully inserted on the connected device
and the deepblue
SKY
. If the connection is ok, check the volume level of the connected device (if
using a headphone output) to make sure it is not muted or set to a very low volume level.
If OPT is selected, make sure the wired connection is fully inserted on the connected device
and the deepblue
SKY
. If the connection is ok, check the volume level of the connected device (if
using a device with a built-in volume control) to make sure it is not muted or set to a very low
volume level.
Make sure the volume of the deepblue
SKY
is set to a comfortable listening level.
