Peach PS500-22, Operating Instructions Manual, Page: 8 / 23

If you exceed the maximum shredding capacity of 6
sheets ( 80 g/m ) in one operation the machine will
switch off automatically. The "Overheat/Overload"
signal lamp lights red. Remove the excess paper
and try again. The machine might be overheated at
the same time, in this case turn off the unit and let
it cool down approx. 40 minutes.
4
Disposal
Guideline 2012/19/EU concerning the
handling, collection, recycling and
disposal of electrical and electronic
equipment and their components (‘waste
electrical and electronic equipment’,
known as WEEE).
The crossed symbol on a waste container indicates
that the machine or appliance must not be disposed
of with household waste, but must be handed over to
an appropriately equipped collection point for proper
disposal.
Directives
We declare that this device has been
manufactured in accordance with the
applicable rules and regulations.
paper jams.
●
Do not shred wet paper, carbon paper or plastic bags.
The remains will jam the cutterbar, which can lead to
jams and reduced performance of the machine.
●
Although the document shredder is capable of
shredding staples, you should remove them. Paper
clips and industrial staples must be removed.
Destroying credit cards
Destroy credit cards by inserting them into the
separate cutting opening
.
Trouble-shooting
Overheating:
Overheating:
If you use the unit for more than 4 minutes continuously
with maximum load, it switches off automatically. The
„Overheat/Overload" signal lamp lights red. The unit
can be used again after a waiting period of approx.
40 minutes.
Paper jam:
●
●
Cleaning and care
Occasionally insert some oiled paper into the paper
opening and run the unit in "FWD mode" for about
10 seconds. Use PEACH Oiled Paper PS100-00 (or
alternatively PEACH Paper Shredder Special Oil
PS100-05).
The outside of the unit can be cleaned with a damp cloth.
Do not use solvents or flammable materials for cleaning.
In the event of a paper jam, the machine stops
automatically and starts reverse operation. The paper is
released again. The signal lamp "Overheat/Overload"
fl asches red.
Set the switch to position “REV” and remove the
jammed paper.
Reduce the number of pages and restart.
2
1
3
3
5
3