www.pdrl.in
19 |
P A G E A E R O F C U S E R M A N U A L
3.5
M
OUNTING
P
ROCEDURE
o
Mount the AeroFC on your drone using the 3M double layer tape or screws provided with
the package.
o
Stick the 3M double layer tape at the bottom of AeroFC (refer diagram A) OR screw the
AeroFC to the mounting plate of the drone (refer diagram B).
Image #8: AeroFC enclosure mounting process #1
o
Make sure that the logo on the flight controller is pointing to the front of your drone as
shown in the following image:
Image #9: AeroFC enclosure mounting process #2
