6EWS STS - EXIT DEVICE TRIM
INSTALLATION INSTRUCTION
Phone: 866-874-3662 | www.pdqlocks.com
1. PREPARE TRIM FOR
INSTALLATION
Rotate lever to proper orientation for door, install
square drive spindle into back of trim.
3. RIM DEVICE - INSTALL
CONTROL BOARD
Install control board assembly – feed wire
through slot under circuit board.
Secure assembly with (4) included wood/
metal screws.
Make wire connection after control board
is installed. Push extra wire into door
cavity.
2. INSTALL TRIM AND EXIT
DEVICE
Prepare door according to included
template.
Install escutcheon trim onto door while
feeding wire through door.
Install exit device and secure with (4)
included ¼-20 x ¾” pan head screws.
Rim Device: Install chassis/head cover.
SVR Device: Skip to step 4
WIRE SLOT
88339 Rev0 – 04/21/20
CONTROL
BOARD
ASSEMBLY
MOTOR
WIRE
LH/LHR
RH/RHR
MOTOR
WIRE
SOCKET
