A Leader in Patient Communication
Solutions
®
MODEL NUMBER:
SW42LED DVB-T LED TV
Document Number:
PD196-345R2
Quick Start Guide
Page 8 of 9
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 800-628-9870 FX 937-743-5664
Pillow Speaker and Antenna Connection
Note:
PD106-416 and PD106-417 Jumper Cables shown (PURCHASED SEPARATELY)
Caution:
Some hospital cable
systems provide power voltage on
the coaxial cable. This TV is NOT
designed to be powered via a coaxial cable.
DO NOT connect to a powered coaxial cable.
Damage will result to the TV.
Warning:
DO NOT connect the pillow speaker circuit Common to earth ground. Grounding of the
Common will defeat the isolation circuitry of the TV and possibly expose the patient to harmful shock
currents should a wiring fault occur.
Cloning
Cloning allows quick programming of a TV from a USB memory
stick (Thumb Drive). Clone operation involves first downloading
setup information from a programmed host TV to a Thumb Drive
and then uploading the setup information to another TV. Cloning
can also be used to re-program a programmed TV.
Note:
After cloning, remotes A, B, C, or D will need to be re-
selected. (See user manual PD196-349 for instructions).
Software Update
1. In the “SETUP” menu
, press▼ to highlight “Software
Information”.
2. Press “OK” to enter “Software Information”
3.
Press▼ to highlight “Software Update”
4. Insert USB and press “OK”.
5. TV will re-boot when update is complete.
