PDI-P10LCD-C USER MANUAL
Document Number PD196-120R1
PDI Communication Systems, Inc.
40 Greenwood Lane
Springboro, Ohio 45066
Phone 937-743-6010
Fax 937-743-5664
email: [email protected]
12
Channel Setup
1. AUTOPROGRAMMING
Press the “SETUP” button on the remote control. A “SETUP
MODE” screen will appear.
2. Using the “CH
▲
” or “CH
▼
” buttons on the remote and select
“Channel Setup”. Press “VOL
▼
” or “VOL
▲
” to enter the
“Channel Setup” sub-menu.
3. Select the correct “Signal” type; either CATV, Air, CATV-IRC,
or CATV-HRC. CATV is most commonly use in Hospitals.
4. Select “Autoprogram”. In the Autoprogram menu select the
“Mode” type; Analog Only, Digital Only, Analog and Digital.
5. Now select the Service Level you wish to program; Free,
Basic, or Premium. Note: A “Programmed” service level can
be reprogrammed if desired.
6. A “Confirm Autoprogram Start” menu will now appear. To
continue press “Chl
▲
” to begin autoprogramming. Press
“Chl
▼
” to exit.
Add / Delete Analog Channels
1. Press the “SETUP” button on the remote control. A “SETUP
MODE” screen will appear.
2. Using the “CH
▲
” or “CH
▼
” buttons on the remote and select
“Channel Setup”. Press “VOL
▼
” or “VOL
▲
” to enter the
“Channel Setup” sub-menu.
3. Select “Add/Delete Analog Channels”. A Menu showing the
three programmable service levels will appear with its current
status. Select the service level to add or delete channels in.
4. The TV will now display an Analog channel in the service level
selected. An on screen menu will show the channel number at
the top right and the current service level. A green channel
number indicates an active channel that is viewable in that
service level. A red channel number indicates that channel is
not programmed into the current service level. Use the
Volume
▲
/
▼
to Add or Delete an Analog channel. Once the
service level is programmed, press “SETUP” to exit the menu.
You may also tune
directly to a channel
during editing by
entering its number
on the remote’s
keypad.
Autoprogram
Mode: Analog Only
Free:
Programmed
Basic: Blank
Premium: Blank
Channel
▲
/
▼
to select
Volume
▲
/
▼
to change
Add/Delete Analog Channels
Free: Programmed
Basic: Programmed
Premium: Blank
Channel
▲
/
▼
to select
Volume
▲
/
▼
to change
Channel Setup
Signal: CATV
Autoprogram
Clear Service Level
Add/Delete Analog Channels
Copy Service Level
Enable/Disable Digital Channel
Channel
▲
/
▼
to select
Volume
▲
/
▼
to change
Channel Setup
Signal: CATV
Autoprogram
Clear Service Level
Add/Delete Analog Channels
Copy Service Level
Enable/Disable Digital Channel
Channel
▲
/
▼
to select
Volume
▲
/
▼
to change
