Communication
Systems Inc.
MODEL PDI-Z13TV SERIES
13”ARM MOUNTED COLOR TV (WR) WIRED REMOTE
Page 3 of 5
Better Solutions Are Within Reach
™
INSTALLATION & SAFETY INSTRUCTIONS
PDI Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH +1-937-743-6010 FX +1 -937-743-5664
PD 196-011 Rev 3
NOTE: When shipped from the factory, the TV/CATV menu option is set to the “CATV” (Cable Television) mode. If not using CATV, set this
menu option to “TV” mode.
PROGRAMMING REMOTE
The TV is program -
med using the
IR remote
PD108-206-13B.
Install two “AAA”
batteries before use.
Programming buttons
menu
,
set -
,
set +
,
and
enter
are used
to perform all TV
programming.
TO ADD/DELETE CHANNELS
Using the remote control.
1.
Press the MENU button.
2.
Press the SET + or – button until the
indicator next to “CH SET” begins to
flash, then press the ENTER button.
3.
Press the SET + or – button until the
indicator next to “ADD/DELETE”
begins to flash, then press the ENTER
button.
4.
Select the desired channels to be
added or deleted using the CH ? or
? button or the SET + or – button.
5.
Press the ENTER button to alternately
ADD or DELETE. The channel
indicator will change colors. Red
indicates a deleted channel and Green
a memorized channel.
6.
Press the MENU button three times
after adding or deleting the desired
channels, to return to normal TV
viewing.
TV/CATV SELECTION
Using the remote control.
1.
Press the MENU button.
2.
Press the SET + or – button until the
indicator next to “CH SET” begins to
flash, then press the ENTER button.
3.
Press the SET + or – button until the
indicator next to “TV/CATV” begins to
flash.
4.
Press the ENTER button to select the TV
or CATV mode. The arrow indicates the
selected mode.
5.
Press the MENU button twice to return to
normal TV viewing.
AUTOMATIC CHANNEL
MEMORY
Using the remote control.
1.
Press the MENU button.
2.
Press the SET+ or – button until the
indicator next to “CH SET” begins to
flash, then press the ENTER button.
3.
Press the SET + or – button until
the indicator next to “AUTO CH
MEMORY” begins to flash, then
press the ENTER button. The TV
will begin memorizing all the
channels available.
4.
Press the MENU button twice to
return to normal TV viewing.
ADJUSTING PICTURE
Using the remote control.
1.
Press the MENU button.
2.
Press the SET + or – button until
the indicator next to “PICTURE”
begins to flash, then press the
ENTER button.
3.
Press the ENTER button repeatedly
to select the item you want to
adjust.
4.
Press the SET + or – button to
adjust the setting.
5.
To return to initial settings press the
RESET button while the picture
adjusting mode appears on-screen.
CLOSED CAPTIONING
Closed Captioning will display text on screen
for hearing impaired viewers.
Closed Captions are accessed using the IR
remote control only.
Press the TV/CAP/TEXT button on the
remote control to switch between normal TV
and the two Closed Caption modes (captions
and ½ of full screen text).
PROGRAM THE TV
This TV is fitted with a V -CHIP which provides censored viewing and control access. The IR remote control is
necessary to enter the password.
ENABLE V-CHIP
1.
Press the MENU button and press the SET+ or – button to select the V -CHIP SET option, then press the ENTER
button.
2.
Enter your password (4 digits) using the remote control’s number buttons (0-9). In the event of entering incorrect
password press the RESET button. Then press the ENTER button.
3.
Enter the same password for confirmation, then press the ENTER button.
4.
Press the SET + or – button to select the V-CHIP option. Press the ENTER button to select the ON.
5.
Press the SET + or – button to select the TV RATING or MOVIE RATING option. Press the ENTER button.
6.
Press the SET + or – button to select the desired rating for the applicable video or TV channel. Press the ENTER
button.
7.
Press the MENU button until the MENU screen is cleared.
WARNING:
A blue “PASSWORD” screen appears when a censored program is w atched. If the password is not
entered, the persistent screen might permanently damage the picture tube leaving a ghost image. For hospital
operation, it is recommended that the V-CHIP
NOT
be enabled.
DISABLE V-CHIP
Deletes any stored password and disables the V -CHIP.
1.
Turn the TV ON and adjust the volume to absolute minimum.
2.
Press both Volume Down button on the set and Channel button (
0
) on the remote control for more than 1 second.
3.
The standard menu screen will appear verifying that the V-Chip is disabled.
V-CHIP OPERATION
