15
Document Number: PD196-103 Rev 1
Figure 2
Pillow Speaker Jumper
AC Power Cord
M4 x 6mm
Screws (4)
Pilfer Screws (2)
CATV Coax Connector
(Coax Not Shown)
Back Mount
Wall
Mount
Wall Mounting on Supplied Bracket
Note: Make sure the
pillow speaker
selection switch
is set to the correct
setting before plugging in the jumper.
The switch changes the voltage
supplied to the pillow speaker, and
could overdrive the pillow speaker if
incorrectly set
