PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Document No: PD196-377R1
PDI-P14T2S LCD HDTV with Android
Page 21 of 59
System
Diagnostics
This menu provides readouts of the TV’s internal operation. The
Diagnostics menu items are read-only and cannot be changed.
1. Enter the System menu.
2. Press
CH▲ or CH▼ to highlight Diagnostics.
3. Press VOL
► to select it.
4. Press the SETUP button to return to the previous menu. To
exit, press SETUP until the programming menus disappear.
Field ON Hours:
Cumulative time TV is actually on.
Field Powered Hours:
Cumulative time TV is powered.
Firmware VSN
0.64
Micom VSN
0.4
Power On Cause
Normal
Reset to Factory Defaults
This menu will allow you to reset all settings to the factory default
settings.
Standby Power
The choice between Low and normal standby power can be chosen
from this menu.
USB Cloning and FW Update
Cloning allows quick programming of a TV from a USB Flash Drive. The
operation involves first downloading setup information from a
programmed host TV to an USB Flash Drive and then uploading the
setup information to another TV. Cloning can also be used to re-
program a programmed TV.
From this menu, you can restore settings, save settings to USB,
upload firmware, upload boot code, and see firmware information.
Restore Settings to TV
1. Enter the USB Cloning and FW Update menu.
2. Press VOL
►to see Source Model.
3. Press Yes
▲ to restore settings.
TV will restart when complete.
