Your Source for Healthcare and
Wellness Infotainment
™
MODEL:
PDI-P14T
Document Number:
PD196-250R3
LCD HDTV with Android Quick Start Guide
Page 4 of 16
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
ARM MOUNTING
This television is designed to attach to a wall mounted suspension arm adjusted to support a television weighing
seven pounds (PDAA507-C).
The single coaxial cable on top of the TV is used to supply low voltage AC or DC power (28VAC or 24VDC) and
the RF signal to the television.
Note:
Contact PDi for additional information on arm compatibility and cable requirements.
DANGER: ARM RECOIL HAZARD
The safety brake pin must remain in the SAFETY BRAKE PIN HOLE whenever the television is
removed from the arm or when the arm is removed from the wall bracket to prevent the arm from
springing open.
1. Slide the TV assembly onto the nose of the arm as shown in Fig. 1.
2. Secure PDISHCS252075 bolt with a 5/32” allen wrench and make coax cable connections as shown in
Fig. 2
TELEVISION PROGRAMMING
Note:
A programming remote control is required to perform all setup operations for the television. The
programming remote (Part Number PD108-420) is NOT packaged with the TV and must be ordered separately.
The following instructions assume you have a programming remote, have correctly mounted the TV, and
connected a coax cable that provides both power and RF signal.
Android Programming
You must enable the HDMI 2 for the Android portion of the P14 to function.
1. Turn TV on.
2. On remote press “TV/AV” button until you reach HDMI 2.
3. This will be a “New User Screen” where you will be asked to enter a pin number.
4. Entering the PIN will take you to the desktop.
*Note:
The P14TV portion of this is not a touch screen. Android will respond when touching the TV screen.
Fig.1
Fig.2
