background image

  

 

 
 
 

Your Source for Healthcare and 
Wellness Infotainment

 

MODEL NUMBER:

 

PDI-E24LEDA-NK LED TV 

Document Number:

 

PD196-275R3 

 

Service Manual 

Page 4 of 12 

 

PDi Communication Systems, Inc.   40 Greenwood Lane   Springboro, Ohio 45066 USA   PH 1-800-628-9870  FX 937-743-5664  

 

Regulatory Information 

FCC 

This equipment has been tested and found to comply with the limits pursuant to part 15 of the FCC Rules.  These limits 
are designed to provide reasonable protection against harmful interference when the equipment is operated in a 
residential or commercial installation.  If this equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by 
one of more of the following measures: 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

 

Consult the dealer or an experienced radio/TV technician for help. 

 

Underwriters Laboratories 

The model PDI-E24 Hospital Grade TV Receiver is a specialized television.  This TV is intended for 
entertainment and educational purposes for use in a hospital, a nursing home, a medical-care center, 
or a similar health-care facility in which installation is limited to a non-hazardous area in accordance 
with the National Electrical Code.  
 
This device is safety tested and listed by the Underwriters Laboratories as a product suitable for use 

in health care facilities in both the United States and Canada. 
 

Energy Star 

PDi Communication Systems, Inc. has voluntarily partnered with the US government as part of the 
ENERGY STAR

®

  program in support of energy efficiency initiatives. The US EPA has authority over 

the ENERGY STAR program.  As an ENERGY STAR partner, PDi Communication Systems, Inc. has 
determined that, in the as-shipped factory default condition, this healthcare television product meets 
the energy efficiency guidelines.  Changes to the default as-shipped television configuration and 
settings, such as enabling certain optional features and functionalities, may increase energy 
consumption beyond the limits required for ENERGY STAR qualification. ENERGY STAR is a 
registered mark owned by the US government.  For more information, visit 

www.energystar.gov

 

 

ESD Notice (Electrostatic Discharge) 

Today’s electronics are electrostatic discharge (ESD) sensitive.  ESD can weaken or damage the electronics in a manner 
that renders them inoperative or reduces the time until their next failure.  Connect an ESD wrist strap to a ground 
connection point or unpainted metal in the product.  Alternatively, you can touch your finger repeatedly to a ground 
connection point or unpainted metal in the product.  Before removing a replacement part from its package, touch the anti-
static bag to a ground connection point or unpainted metal in the product.  Handle the electronic control assembly by its 
edges only.  When repackaging a failed electronic control assembly in an anti-static bag, observe these same 
precautions. 
 

Product Safety Servicing Precautions 

1. 

POWER SOURCE

 Use only a power source indicated for use with this product.  This TV will operate on AC voltage.  

To avoid personal injury, disconnect the power before servicing this product.  If electrical power is required for 
diagnosis or test purposes, disconnect the power immediately after performing the necessary checks.   

2. 

REPLACEMENT Replace

 only with the part number specified. 

3. 

VOLTAGE CHECKS Exercise

 care when making voltage and waveform checks to prevent costly short circuits from 

damaging the unit. 

4. 

METAL OBJECTS

 Be cautious of lost screws and other metal objects to prevent a possible short in the circuitry. 

 

5. 

SAFETY CHECKS  

This hospital grade television requires special safety checks before returning to service.  Observe 

and follow the 

“Safety Check”

 section in this service manual. 

 

 

 

Summary of Contents for PDI-E24LEDA













Reviews: