PD196-370R1
PD251-047 Universal Android Module Kit
Page 2 of 10
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Copyright, Trademarks, and Disclaimer
Copyright,Trademarks
© 2016 PDi Communication Systems, Inc. All rights reserved. PDi-TAB
®
is a registered trademark of PDi Communication
Systems, Inc. Product logos, brands and other trademarks displayed within PDi’s products are the property of their
respective trademark holders, who are not affiliated with, endorsing, or sponsoring PDi Communication Systems, Inc. or
our products.
Disclaimer
The author and publisher have used their best efforts in preparing this manual. PDi Communication Systems, Inc. makes
no representation or warranties with respect to the accuracy or completeness of the contents of this manual and
specifically disclaims any implied warranties or merchantability or fitness for any particular purpose and shall in no event
be liable for any loss of profit or any other damages. The information contained herein is believed accurate, but is not
warranted, and is subject to change without notice or obligation.
SAFETY INSTRUCTIONS
CAUTION: THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE PERSON AND SHOULD
CONFORM TO ALL LOCAL CODES. READ AND FOLLOW THE SAFETY INSTRUCTIONS BEFORE ATTEMPTING
THIS INSTALLATION.
1. Read Instructions – All the safety and operating
instructions should be read before the product is
operated.
2. Keep these Instructions – The safety and
operating instructions should be retained for
future reference.
3. Heed all Warnings – All warnings on the product
and in the operating instructions should be
adhered to.
4. Follow all Instructions – All warnings on the
product and in the operating instructions should
be followed.
5. Water and Moisture – Do not expose this
product to rain or moisture. Do not use this
product near water – for example, near a bath
tub, wash bowl, kitchen sink, or laundry tub; in a
wet basement; or near a swimming pool; and the
like.
6. Cleaning – Unplug this product from the wall
outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Clean only with a
dry cloth.
7. Ventilation – Slots and openings in the cabinet
are provided for ventilation to ensure reliable
operation of the product and to protect it from
overheating. These openings must not be
blocked or covered. The openings should never
be blocked by placing the product on a bed,
sofa, rug, or other similar surface. This product
should not be placed in a built-in installation
such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s
instructions have been adhered to.
8. Heat – The product should be situated away
from heat sources such as radiators, heat
registers, stoves, or other products (including
amplifiers) that produce heat.
9. Power-Cord Protection – Protect the power cord
from being walked on or pinched, particularly at
plugs, convenience receptacles, and the point
where they exit from the product.
10. Attachments
–
Only use
attachments/accessories specified by the
manufacturer.
11. Servicing –Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
12. Oxygen Environment – Do not use in an oxygen
tent or oxygen chamber. Such use may cause a
fire hazard.
13. Power Sources – This product should be
operated only from the type of power source
indicated on the marking label. If you are not
sure of the type of power supply to your home,
consult your product dealer or local power
company. For products intended to operate
from battery power, or other sources, refer to the
operating instructions.
14. To ensure proper operation and to meet safety
and electromagnetic interference (EMI)
requirements, you must connect the module to
earth ground before you connect power. You
must use the protective earthing terminal on the
chassis to connect the module to earth ground.
A qualified electrician must install the ground
wire to the module and to a proper earth ground.
