Page 3 of 3
7. Remove the new PD251-043 DVD module from the box and plastic wrap. Side into place on the P-
Series TV. Verify that the rails of the DVD module are in proper location to the mounting ribs on the TV.
8. Re-install the 44 pin to 15 pin DVD cable to the module.
9. Install the PDISEMSM3X55 screw to hold the DVD player in place.
NOTE:
Retaining screw must be installed to avoid the player from falling.
10. Plug in the P-Series TV power cord into the wall outlet. Verify the functionality of the TV and new
PD251-043 DVD module.
End of Procedure.
Detailed Views
