3
3. SAFETY INFORMATION ( Read First)
Warning
To avoid possible electric shock or person injury:
1) Do not use if Tester appears damaged or if the Tester is
not operating properly. If in doubt, have the Tester serviced.
2) Do not apply the Tester to more than the rated voltage, as
indicated on the Tester.
3) Use caution with voltage above 25VAC as a shock
hazard may exist.
4) Comply with all local and national safety requirements.
5) Always use proper protective equipment as required by local
or national authorities.
6) Before each use, verify operation by testing a known,
working circuit that is within the rating of this unit. A steady
red glowing tip (not flashing) and beep indicate voltage is
present. If no indication, voltage could still be present. Do
not rely on this tester with shielded wire. Operation may be
affected by differences in socket design, type and condition.
If this product is used in a manner not specified by the
manufacture, protection provided by the product may be
affected.
