PAGE 18
Class 1 Medical
Rev. 2
13
DAMAGE REQUIRING SERVICE BY QUALIFIED SERVICE AGENT
PDG has trained customer service representatives in many locations. To find your
nearest Customer Service Center, contact PDG directly using telephone, fax, or e-mail
contact information.
PDG PRODUCT DESIGN GROUP INC.
#103- 318 East Kent Avenue South, Vancouver, BC, Canada. V5X 4N6
Ph: (604) 323-9220 Fax: (604) 323-9097 E-mail: [email protected]
Supply the serial number from the product you are attempting to service and we will be
happy to inform you of the supplier who initially provided your product.
In some circumstances it may be required that your wheelchair be returned to a
Qualified Service Agent for repairs. If any of the following conditions are observed, the
wheelchair must be serviced by a Qualified Service Agent:
Any part of the frame is cracked or broken
Any weld is cracked or broken
Always contact your Service Agent prior to sending a wheelchair for repairs. For safe and
secure shipping, the wheelchair must be boxed or fastened to a pallet to ensure it does
not become damaged during shipping. Service agent will provide specific instructions for
packaging and shipping your wheelchair. Alternatively, Qualified Service Agent may
arrange for pick-up.
14
SETUP, ADJUSTMENTS & OPTIONS
14.1
Adjustment Guide
The following instructions are intended to help in making wheelchair adjustments. It is
important to note the initial wheelchair configuration prior to making changes. When
making changes, dealers and users should do so under the guidance of a health care
professional who is knowledgeable of the abilities of the wheelchair user. Be sure that
when finished, all components are properly tightened and have been completed in
accordance with these instructions. DO NOT over tighten hardware attaching to the
frame. This could cause damage to the frame tubing or fasteners.
Tools Required
Philips Screw Driver
Allen Key……………………………….................□1/8”
□5/32”
□3/16”
□1/4”
Adjustable or Open End Wrench.............□7/16” □3/8”
□1/2”
□9/16”
Socket Head Driver with Socket Heads........................................ □9/16”
□3/4”
Summary of Contents for BENTLEY
Page 43: ...PAGE 43 Class 1 Medical Rev 2...
