Broadway Triple HD 292
Quick Install Guide
©
2010-2014
PCTV Systems S.à r.l.
QI-BROADWAY-292-V1-ENG
Specifications are subject to change without notice or obligation.
Welcome!
Thank you for purchasing Broadway from PCTV Systems.
Please follow these instructions to quickly start streaming live
TV or TV recordings to virtually any PC and handheld device
in your network.
What is Broadway?
Broadway brings TV to your Android-, Apple- device or PC
(see
www.pctvsystems.com
for an up-to-date list of supported
devices). In addition you can record the TV program to a
connected USB mass storage device.
Broadway needs two things in order to operate:
1. A TV source
for live TV – can be an over-the-air TV
antenna (DVB-T/T2 / Freeview transmission) or your
digital cable TV or set top box. (unencrypted channels)
2. A connection to a network router
in your home
.
The connection can be wireless (Wi-Fi) or
wired (Ethernet).
When you are at home, you can watch the video signal
streamed by Broadway over a Wi-Fi connection. When you
travel, you need to have an Internet connection (Wi-Fi or
3G/4G) in order to receive the video signal from Broadway.
Additional information on the setup and use of Broadway
can be found at:
http://distan.tv/manuals
.
Broadway hardware setup
Step 1: Unpack
Check that your package includes the following:
Depending on the version of your product, package contents
may vary.
•
Broadway box
•
Power supply unit with plug adapter
•
Ethernet cable
•
IR-Blaster cable
•
6 (4 + 2 spare) rubber feet
•
Wall mounting kit (2 screws / 2 wall plugs)
•
Drilling template
•
Mini indoor antenna
•
Quick Install Guide
Step 2: Connect to the router
N
ote
: For the initial setup, the connection must be
wired.
•
Use the provided Ethernet cable to connect Broadway to
the router of your home network.
Important
:
Make sure the router is connected to the
Internet.
Step 3: Connect a TV source
You can connect the following video sources to Broadway:
•
DVB-T/T2 (Freeview)
outdoor antenna (recommended)
or the included mini indoor antenna.
•
Cable TV
connect your cable to your antenna plug
•
Set top box / analog camera
Use stereo audio cables and S-Video or composite
video cables or if required a SCART adapter (none
included in the scope of delivery).
(cameras with USB plug only are not supported)
Connect the IR-Blaster cable (optional)
•
Connect the IR-Blaster cable as shown in the image below
to control selected channels on your set top box.
N
ote
: Make sure the IR-transmitter is close to the
IR-receiver window of your set-top box but does not
cover
it completely (see previous image).
Step 4: Connect power and turn on
•
Insert the included power supply adapter into the body of
the power supply unit.
•
Connect your Broadway box to a wall socket using the
provided power supply unit.
C
aution
: You may use Broadway only with the
provided power supply unit.
•
Broadway starts.
The white indicator light on the front panel will start to
blink.
•
Wait until the indicator light stops blinking.
•
Broadway is now connected to your router and ready for
use.
N
ote
: For the initial installation you need a Ethernet
cable connection to your router
Broadway setup in your
home network (Wi-Fi/LAN)
The setup of Broadway is done from your client device
As part of the initial setup, you will need to go through the
following setup procedure.
Step 1: Access Broadway and follow
the instructions of the Setup Wizard
•
Make sure your client device is connected to your home
network.
•
Open an Internet browser window. Use Safari on your
Apple product or any web browser on your PC.
•
In the address field type:
http://distan.tv
•
You will see the
Broadway login screen
.
.
•
The
Broadway Setup Wizard
opens.
.
N
ote
: Your router must be connected to the Internet.
•
Follow the instructions of the
Broadway Setup Wizard.
It will guide you through the setup procedure helping you
to configure the wireless device connection to the router
and run the first channel scan.
•
Select the way you want to operate Broadway, wired or
wireless.
•
Click
Next
and select your TV source out of the following
choices:
•
AV-in with connected set top box and IR-Blaster
support:
this is used, when connecting Broadway to a
set top box.
•
AV-in with connected camcorder:
this can be used if
you have a security camera and want to watch the
video via Broadway.
•
TV tuner with connected TV antenna or TV cable
:
N
ote
: More information can be found in the online
Broadway User's Guide at:
http://distan.tv/manuals
.
Scanning for TV channels
If you have chosen
TV tuner with connected TV antenna
or cable
as your TV source, you will now be taken through
the channel scan procedure.
N
ote
: Broadway does not
N
support WEP encryption.
Your Wi-Fi must WPA/WPA2 encrypted.
ote
: You cannot use the integrated TV tuner(s) and
the AV-input simultaneously.
•
Make sure the
Location
is set to your country correctly.
•
Click
Start Scan
.
•
When the scan is complete, Broadway will inform you how
many channels were found and show you a list of channels.
N
ote
: If Broadway did not find any channels, please
check your antenna and make sure it is plugged in
well
to the connector on the back of Broadway.
Use an outdoor antenna if you are in a region with weak
DVB-T signal.
•
After the channel scan is complete, click
Quit
to exit the
Setup Wizard and start watching live TV.
If you have chosen:
AV-in with connected set top box and IR-
Blaster support
the IR-Learning Wizard will guide you through
the IR-Blaster configuration (for further details turn the page).
N
ote
: Your web browser must support Flash video from
Adobe® or HLS streaming from Apple®.
