background image

 

 

 

      PCTV HD Card (800i)

        Quick Start Guide 

 

 

 

 

 

Dear customer, 

Thank you for purchasing this state of the art product from PCTV Systems. We hope 
you will enjoy its high quality and extensive features.  

 

PCTV HD Card (800i) is a a triple mode highly versatile TV tuner card for the 
reception of digital free-to-air TV (ATSC), unencrypted digital cable TV (ClearQAM), 
analog TV via cable or antenna, and FM radio. 

 

Note:

 ClearQAM digital cable TV is not available from all cable operators in North 

America. Please contact your local cable TV operator for the availability of   
ClearQAM TV. 

 

ATSC and ClearQAM can be received in both high and standard definition. 
This guide is meant to get you set up and watching TV on your PC in minutes. 

 

I. Pack Contents*

 

PCTV HD Card 

(800i) 

FM 

antenna 

PCTV 

Installation Disc 

Remote 

control 

Quick Start 

Guide 

 

 

 

Remote control 

receiver cable

  

A/V input  

adapter

 

* Illustrations are samples; pack contents may vary depending on the version of your product. 

 

II. Hardware Installation

 

1.  Divert any possible electrostatic charge from your body by touching the casing 

of your PC. 

2.  Turn off your computer and any peripheral devices connected to it. Disconnect 

your computer from the power supply as well as all necessary cables and 
components. 

3.  Loosen the computer cover screws and remove the cover. 
4.  Select an available PCI slot. Loosen the slot cover on the back panel of the 

computer. Make sure to keep the screws in a safe place. 
 

5.  Insert the card in the available PCI slot. Hold it firmly on the upper edge and ease    

it down into the slot by applying even pressure on both ends. Press down on the 
upper edge until the card fits securely in the expansion slot. 

6.  If you cannot easily insert the card, do not use force because this can bend and 

damage the contact springs to the socket connector. Instead, remove the card and 
try to insert it again. 

7.  After you have inserted the hardware, tighten the card retaining bracket firmly onto 

the back of the computer. 

8.  Now put the cover back onto your computer and reconnect the peripherals and the 

power supply. 

 

Image is a sample. 

 

III. Connecting

 

the Remote Control Receiver Cable

 

1.  In order to install the remote control device, insert the receiver cable of the  

remote control into the remote control input of your hardware. During insertion, 
note that although the jack needs to sit firmly in the socket, you should not     
force the jack in as this may damage the socket. 

 

Image is a sample. 

2.  Fasten the other end of the receiver cable to your monitor or the housing of     

your computer by using the adhesive strip included in the delivery. 

 

Make sure that the area between the remote control and the receiver is 
unobstructed. 

 

 

IV. Selecting the TV Connection Type 

 

Option 1: Antenna (for ATSC reception) 

Connect a coaxial cable from your rooftop aerial or an amplified indoor antenna to     
your PCTV hardware input (Ant.). 
For FM reception, connect the included FM antenna to your PCTV’s FM antenna input. 

 

 

Image is a sample. 

For digital TV (ATSC) reception, you will get the best results if you connect your 
PCTV hardware to a properly adjusted rooftop antenna using double-shielded coaxial 
cables and a digital-enabled antenna amplifier.

 

 

Please contact your local dealer for antennas optimized for digital TV (ATSC) 
reception. Most cities have good ATSC transmission coverage. 

 

Please note

 that the reception of digital TV (ATSC)

 

is dependent on location and may 

be impaired by steel-reinforced walls as well as tall neighboring buildings. In this type 
of environment, an amplified external/roof antenna is required.                             
Check on 

http://www.antennaweb.org

 for information about ATSC availability in your 

area. It is generally not possible to receive an ATSC signal while travelling (e.g. in a 
car or train).  
 

Option 2: Cable (for analog or ClearQAM digital reception) 

Connect coaxial cable from your cable jack to your PCTV hardware input (Ant.). For 
FM reception, connect the included FM antenna to your PCTV’s FM antenna input. 

 

Note:

 This configuration will allow you to receive unencrypted digital cable TV 

channels in SD and HD. Reception of encrypted digital premium channels is not 
supported.

 

 

Image is a sample. 

ClearQAM Note: 

not all cable TV operators send ClearQAM digital cable TV. Please 

check with your local cable operator for the availability of ClearQAM digital cable.

 

Reviews: