Stud Mount (Typical Installation)
1. Determine antenna installation location. Ensure that the mounting
surface is as flat as possible.
2. Cut/drill holes through mounting surface sized and positioned as
shown in the schematic.
3. Clean mounting surface and bottom of antenna.
4. Feed cables through hole and route to desired location.
5. Position antenna onto mounting surface. Mounting stud shall be
located in the hole.
6. On bottom side of mounting surface slide slotted nut around cables
and assemble to mounting stud.
7. Four additional mounting holes are provided in each corner for extra
support if required.
INSTALLATION INSTRUCTIONS
VenU
®
PCTHP-CBRS-4-NF
