PCTEL SeeGull EXflex, Reference Manual

Page: 16 / 23

SeeGull
®
EX flex
®
Reference Manual
PCTEL, Inc., RF Solutions Page 16 Revision F
6. Walk Test Kit Information
This section discusses walk test options that
can be used with the SeeGull Scanning
Receiver system.
Deployment of wireless data services is
resulting in further increases of in-building
traffic and coverage requirements. The
measurement, enhancement and
optimization of indoor coverage are now an
increasingly important aspect of wireless
engineering.
The PCTEL SeeHawk Walk Test Kit
comprises a complete set of accessories
that enable the indoor use of the PCTEL
SeeGull EX
flex Scanning Receiver. The
Walk Test Kit provides a cost effective
solution for evaluating existing in-building
coverage and for planning, deploying and
testing indoor coverage systems.
The PCTEL
’s Walk Test Kit provides the
right solution for
“Walk Testing” that enables
wireless engineers to address the three key
steps of in-building coverage assessment
and planning:

Evaluating In-building Coverage
from Outside Networks

Planning New In-Building Networks

Coverage Validation for New or
Existing In-Building Networks
6.1. Walk Test Kits
PCTEL offers a Walk Test Kit for the
SeeGull EX
flex Scanning Receiver, the
OP207 Walk Test Kit as shown in Figure 12 .
It delivers a convenient way to carry and
power the SeeGull EX
flex Scanning
Receiver for indoor measurements. The
OP207 Walk Test Kit consists of:

Carrying case

Battery Pack w/ Battery Case

Battery Charger w/ Power Cord

EX USB Data Cable
Figure 12 - OP207 Walk Test Kit
6.2. Indoor RF Antenna Information
PCTEL offers wideband rubber duck style
antennas for indoor use. There are three
models depending on the frequency
required.

OP293: Indoor Ant. 700-1100 MHZ,
1475-2700 MHZ

OP241: Indoor Ant., 698 -2700 MHZ