10
USING THE CYBERMAX FM+ (WIRING)
Wiring CYBERMAX FM+ is easy:
- Connect dummy load (if you have one) or antenna to the BNC antenna connector
- Connect audio source to the audio inputs
- Connect power supply to the power jack (center is positive)
USING THE CYB (POWER-UP PROCEDURE)
The proper procedure for using the CYBERMAX FM+ is as follows:
- Wire everything as described above. If you have SWR/POWER meter, wire that one as well between transmitter
and antenna.
- Power-up the transmitter and immediately set power to zero with the up/down/menu keys, set frequency and than
set power to about 50%.
- If you have SWR/power meter check whether everything is working as expected. Check audio as well.
- Now try to increase power to 100% making sure everything is in order.
ABOUT THIS MANUAL
If you uncovered an error or wish to propose an improvement to this manual, check out our forum. We have a section
dedicated to all manuals here and you can discuss each manual with other forum members:
http://www.pcs-electronics.com/phpBB2/viewforum.php?f=33
THANK YOU FOR PURCHASING OUR CYBERMAX FM+ TRANSMITTER!
We hope you will enjoy it as much as we do and remember to tell your friends about it. Please feel free to leave your
comments at our website or post your experience in our forum.
From all of us we wish you happy broadcasting!
PCS Electronics team
www.pcs-electronics.com
APPENDIX A: IMPROVEMENT TIPS
Think about purchasing SWR meter to tune and align your antenna. A good antenna system is extremely important
and can make up for a lot of power. For a suitable SWR meter and other useful items check under transmitter
accessories:
http://www.pcs-electronics.com
If you can’t get much range with your homebrew antenna, have a look at ours, some of them are priced so low its not
really worth the trouble:
http://www.pcs-electronics.com
Still not enough range? Well, how about a 150W or 300W amplifier?
http://www.pcs-electronics.com
So, do you think you can handle it? We think you sure can!