Pg. 4
about 2-3 hours.
• Connect the USB charging cable to a computer USB port and the Micro
USB plug to the charging port of the device. The Red LED light turns on
while the device is charging. It takes 2-3 hours for the unit to fully charge.
When the battery is fully charged, the red light will turn to blue.
Turning on/off the device
• Press and hold the MF button for 2-4 seconds to turn ON or OFF the
device with the sound “POWER ON” or “POWER OFF”.
Pairing the device with BT devices (phone or music device)
• Once you have activated BT on your device, select the “BL-1376HS” from
the list of available BT devices.
• Please note pairing mode on the device will last for around 10 minutes.
If no devices are paired within around 10 minutes the device will power off
automatically.
• If pairing is unsuccessful, turn off the device first and then re-pair following
the above steps.
• Once you have paired the BT Headphone with a device, the Headphone
will remember this device and will pair automatically when the device’s BT is
activated and in range. You do not need to re-pair any previously connected
devices.
• The BT Headphone will attempt to automatically connect to the last device
it was paired with when switched on. If you want to pair it with a new device,
please follow the steps outlined above.
• Once the BT Headphone is paired with your device the music will transmit
through the BT Headphone. Please refer to your device’s user manual for
further information.
Summary of Contents for PCMSP1376HS
Page 1: ...User Manual PCMSP1376HS...
Page 2: ......
Page 9: ......
Page 10: ...www pcm electronics com...
