Mode d’emploi
Operating instructions
Betriebsanleitung
Istruzioni per l'uso
Garant:
BT
Document:
BSP-513 Mode
d'emploi.docx
Validation: 02.02.18
Page: 2 de 4
BSP513
Zone industrielle C
Rte du Grammont 101
CH-1844 Villeneuve
PCM WILLEN SA
SWISS MADE
Copyright © PCM Willen SA.
Tél ++41 21 967 33 66
Fax ++41 21 960 38 95
http://www.pcm.ch
email:
English
1. To fix the tool holder to the machine,
introduce the shank and use the pin for
the positioning.
Then tighten the 2 screws of fixations
(Important, make sure that the screws
have the same strength of tightening).
For Citizen A20 and A32, fix the tool
holder with the screw M8.
For Citizen L220 and L32, fix the tool
holder with the screw M6
2. Adjust the zero point.
3. During the mounting or the
dismounting of your cutting tools, block
the broach on flats planned for that
purpose, using the adapted spanners.
