NEXUS
Generator & Multi-head Inflator user manual
www.pclairtechnology.com
1. Install filter-regulator (ATC12).
Remove filter-regulator unit and dial gauge from packaging and
apply PTFE tape to the dial thread before screwing into the unit.
2. Installation of filter-regulator mounting brackets
Locate holes on side of cabinet and mount the brackets to these
using the screws and washers provided (fig2). The two slotted
bracket mounts are already pre-attached to the filter (fig3).
3. Attachment of pneumatic pipe to the filtration unit.
Pipe A is attached to the right hand side of the filter-regulator via a
push in fitting.
4. Installation of hose mounting hooks
There are two mounting hooks (Fig 5) that need mounting on each
side of the cabinet. Screws and washers are provided. Simply
locate mounting holes on the side of cabinet and install (Fig 6)
Front
Fig 4
A
B
Grommet
Fig 1
Dial
Fig 2
Re-apply PTFE tape
Fig 3
Fig 5
Fig 6
N6 Version
