background image

1. FEATURES

*  Designed to meet ISO 7027.
*  NTU ( Nephelometric TURBIDITY Unit ) measuring unit.
*  Wide and auto measurement range : 0 to 1,000  NTU.
*  High resolution : 0.01 NTU/1 NTU.
*  The unique optics structure, enables the instrument to

read low value of TURBIDITY to the high level up to
1,000 NTU.

*  Four operation buttons and two calibration points, easy

operation and  giarantee the spec. accuracy.

*  Jumbo LCD, easy readout.
*  Microprocessor circuit assures maximum possible

accuracy, provides special functions and features.

*  Battery operated for field and on-site testing convenience.
*  Data hold function for freezing the desired value on

display.

*  Records Maximum and Minimum readings with Recall.
*  Heavy duty & compact housing with hard carrying case,

 designed for easy carry out & operation.

*  Auto shut off is available to save battery life.
*  Application : Test municipal water, food and beverage

water,  or other aqueous solution where fluid clarity is
important.

2. SPECIFICATIONS

Circuit

Custom one-chip of microprocessor LSI
circuit.

Display

LCD size : 41 mm x 34 mm.

Range

0.00 to 50.00 NTU,  50 to 1,000 NTU

* NTU : Nephelometric Turbidity Unit 
* Auto range

1

Summary of Contents for TUM 20
















Reviews: