© PCE Instruments
3
4
Device description
No.
Description
1
Display
2
Measuring aperture
3
Magnetic white reference, serial number, model name and key
5
Switch the meter on and off
To switch on the meter, press the key on the top of the meter. To turn off the
meter, press and hold this key until "Power off" is displayed. This takes at least 5
seconds.
6
Make a measurement
To make a measurement, first switch on the meter. Remove the white reference
and then place it on the key of the meter so that the serial number and model
name are on the outside and the white reference is no longer visible on the inside.
A magnet in the reference will keep the module in place. Now place the meter
appropriately on your sample. Make sure that the measuring aperture is
completely closed. Now push the magnetic reference plate to press the
measuring key. The measurement is carried out directly and the measured value
is shown on the display.
Note:
To be able to make settings to the meter, an Android-capable end device with a
Bluetooth interface is required.
