Manual
4
2
Safety notes
Please read this manual carefully and completely before you use the device for the first time. The device
may only be used by qualified personnel and repaired by PCE Instruments personnel. There is no
warranty of damages or injuries caused by non-observance of the manual.
- The device may only be used in the approved temperature range.
- Never use the device and any accessories with wet hands.
-
The device and all accessories should only be opened by qualified personnel of PCE Instruments.
- The instrument should never be placed with the user interface facing an object (e. g. keyboard side on a
table).
- You must not make any technical changes to the device and its accessories.
- The appliance and its spare parts should only be cleaned with a damp cloth / use only pH-neutral
cleaner, no corrosive liquids such as alcohol. Also, do not use abrasives or solvents for cleaning.
- This product is designed for industrial use only. Do not use the system for human or any other biological
inspection.
- Do not remove the SD card when capturing photos or video as this may cause loss of data and damage
the SD card.
- Video recording requires an SD card with fast writing speed. We recommend 80 X (or above) writing
speed SD cards for best video quality.
- Before each use, check the device as well as the accessories for visible damage. If any damage is
visible, do not use the equipment.
- Do not use this product in a fuel tank or other dangerous environments such as gasoline or alcohol
storage tanks.
- Do not try to disassemble the product as this may cause electric shock and could damage the unit.
- Please use only recommended components or accessories. Unapproved components and accessories
may cause damage.
- Avoid direct exposure to sunlight for a long period of time. Store the system in a cool, dry and well
ventilated place.
-
If the system “freezes” (so that pressing keys has no effect), press the Reset key at the back of the
system. Check the system description section for the location of the Reset key.
- To avoid danger, do not put the insertion tube into any flammable liquid or gas.
- The insertion tube contains a series of small wires that control the optics and electronics of the camera
tip. To ensure long-term reliability, do not bend the insertion tube more than 90 degrees and always
bend the insertion tube in as large an arc as possible during usage and storage.
- To clean the lens and camera head, use the cleaning liquid and swab provided in the cleaning kit.
- Do not use the device and its accessories in explosive atmospheres.
This user's handbook is published by PCE Instruments without any guarantee.
We expressly point to our general guarantee terms which can be found in our general terms of business.
If you have any questions please contact PCE Instruments.
