© PCE Instruments
6
4.5
Save and retrieve data
1.
The meter can save up to 99 groups of readings for later recall. Each memory location
saves relative humidity and ambient temperature as well as either thermocouple
temperature, dew point temperature or wet bulb temperature.
2.
Press the SAVE key to save the current data to a memory location. The LCD will
automatically return to the real-time display within 2 seconds. After 99 memory
locations are used up, the subsequently saved data will overwrite the previously saved
data of the first memory location.
3.
Press the
key to recall the saved
data from the memory. Press the ▲ or ▼ key to
select the memory location you need. Press the
key for 2 seconds to return to
normal mode.
4.
When a memory location is recalled, the relative humidity and ambient temperature or
thermocouple temperature values saved in that memory location are displayed by
default. Press the MODE key to toggle between the wet bulb or dew point temperature
values saved in the displayed memory location.
5.
To clear all 99 data saved in the memory, press and hold both SAVE and
keys for
3 seconds.
4.6
Thermocouple temperature measurement
If contact temperature measurement on objects is required, use the thermocouple probe. Any K-
type thermocouple can be connected to this instrument. When the thermocouple is plugged into
the socket on the meter, a "T/C" icon appears on the LCD. Now the thermocouple makes a
temperature measurement.
4.7
Automatic power-off / backlight
If no key is pressed within 60 seconds in APO (auto power off) mode or recording mode, the
backlight will automatically dim to save power. Press any key to return to high brightness.
In non-APO mode, the backlight is always very bright.
To prolong the battery life, the device switches off automatically after approx. 10 minutes without
operation.
Press the
key lightly to enable or disable the APO function. When the APO icon disappears,
it means that auto power off is disabled.
Press the
key for about 3 seconds to turn off the meter.
Note:
In recording mode, the APO function is automatically disabled.
