11. ADVANCED SETTING
press the " FUNCTION (SET) Button " ( 3-6, Fig. 1 ) continuously at
least Five seconds will enter the " Advanced Setting " mode. then
press the " FUNCTION (SET) Button " ( 3-6, Fig. 1 ) once a while in sequence
to select the two main function, the display will show :
POFF.......
Auto power OFF management
t-CF.......
Select the Temp. unit to
℃
or
℉
Remark:
wait eight seconds or short press " power button " to back measurement.
11-1 Auto power OFF management
When the lower display show " POFF "
1) Use the "
▲
button " ( 3-3, Fig. 1 ) or "
▼
button " ( 3-5,Fig. 1 "
to select the upper text to " yES " or " no ".
yES - Auto Power Off management will enable.
no - Auto Power Off management will disable.
2) After select the text to " yES " or " no ", press the
" REC(Enter) Button " ( 3-4, Fig.1 ) will save the setting
function with default.
11-2 Select the Temp. unit to
℃
or
℉
When the lower display show " t-CF "
1) Use the "
▲
button " ( 3-3, Fig. 1 ) or "
▼
button " ( 3-5,Fig. 1 "
to select the upper Display text to " C " or " F ".
C - Temperature unit is
℃
F - Temperature unit is
℉
2) After Display unit is selected to " C " or " F ", press the
" REC(Enter) Button " ( 3-4, Fig.1 ) will save the setting
function with default.
13
