Manual
3
1
Introduction
Thank you for purchasing a surface texture meter from PCE Instruments.
The surface texture meter PCE-RT 10 is a small, light device with a very simple navigation. Despite the
fact that the device functions on a very complex and elaborated level, the measurement results can be
gained very easily and in a comfortable way. Due to a high insensitivity the device has a long lifetime.
This device is calibrated according to ISO, DIN, ABSI and JIS standards. The surface texture meter can
be applied for various mechanical manufacturing processes as controlling equipment. The device
indicates all calculated measurement results on its LCD display at any time. In order to measure the
roughness of a surface, the sensor has to be placed onto the surface. Subsequently, the sensor moves
smoothly in the lead on the surface. Now the device will calculate the measuring values. Thus the
indicated values are a result of the sensor's movement, while it is induced with electricity. The fast DSP
processing supports quick measurements results, which are then shown on the surface texture meter's
display. If the instrument is not used for five minutes, it will turn itself off automatically.
2
Safety notes
Please read this manual carefully and completely before you use the device for the first time. There is no
warranty of damages or injuries caused by non-observance of the manual.
-
The instrument may only be used as described in this manual. If it is not used in the described
way it may cause injuries or break.
-
Only use the device in the prescribed ambient conditions. Protect it from direct sunlight, fluids and
high humidity.
-
The instrument may only be used by qualified personnel and repaired by PCE Instruments
personnel.
-
Do not place the instrument on the user interface since scratches may appear on the interface.
-
Do not make any technical changes on the device.
-
The appliance should only be cleaned with a damp cloth / use only pH-neutral cleaner.
-
Only use the tester with dry hands.
-
The instrument can only be used with and replaced by accessory supplied by PCE Instruments.
-
The measuring instrument cannot be used in explosive atmospheres.
-
If the tester is not used for a longer period of time the batteries should be taken out of the device
in order not to damage it.
This user's handbook is published from PCE Instruments without any guarantee.
We expressly point to our general guarantee terms, they can be found in our general terms of business.
If you have any questions please contact PCE Instruments.
