2
- to increase the battery life you should often use it
- remember about correct polarity plug of power supply fig. 2
Fig. 2 Correct polarity the plug of power supply
4. Additional features include: remembering of the last measurement result , counting, additional
filtration
Remembering of the of the last weighing
result
-
press the button "F" (F1) (the inclusion of this feature is indicated by a flashing sign "+" or
"-" in front of the weight value);
-
after action of loading the pan, transient time is indicated by flashing
-
stabilize indications cause blocks of the result and a stable reading of it, even after remov-
ing the load;
-
if you want to cancel the result of the weighing press the "TARA" button.
-
.
Counting the elements of the same mass.
-
The scale can determine the mass per unit calculated on the basis of sample components with
different frequencies: 1 pc., 2p., 5p., 10p., 20p., 50p., 100p., 200p., 500p. The system has the
limitation of software to prevent counting calibration sample with mass <1% Max. For
counting heavier and less numerous elements you should calibrate the procedure of counting
using a smaller sample (eg, 10 units). During counting lighter and more numerous elements
you can calibrate the procedure using more numerous of samples (eg, 100).- The counting er-
rors is affected by many factors. The most important include: the appropriate selection of the
range and accuracy of the scale, determine the calibration of sample size, the differences be-
tween the mass of the individual component
-
to start counting function repeatedly press "F" (F1) until the display indicates sign "Count";
-
then press the "TARA" buitton for approval of choice-window; it will show for example
an indication "L10", where number is the sample size, which can be changed by pressing "F"
(F1);
-
after pressing the button "F" (F1) you choose adequately large sample (see description
above); wait about 3 sec for the automatic change display indication You should see a flash-
ing display "I_ ___ I". No change the indication means that the reading is unstable;
-
put on the pan deductible items;
-
continuous indication "1___ _ I" means that the minimum sample weight was achieved (for
very small mass calibration of the counting is not possible);
-
press the "TARA" button to accept the calibration mass;
-
appearance of letters indication “ps” means the completion of the calibration procedure of
counting. Number of pieces is shown on the display of scale. In counting mode tare function
works in the same way as in the weighing mode. Analog line does not work in counting
mode.
-
subsequent press "F" (F1) – start the menu to select the level of filtration (
additional fil-
tration
can weigh moving objects)
