© PCE Instruments
14
Use the "Clear All Peak" function to clear the memory. Once clearing is complete, the display
shows "CLEAR OVER".
9
Alarm limits
The alarm limits function is useful, for example, to check during quality control whether the sample
is working within the specified tolerances. Two limits can be set here. If the measured value is
lower than the set "Lower Limit", this is signalled by the red and green LEDs lighting up. If the
measured value is between the set "Higher Limit" and "Lower Limit", only the green LED lights
up. If the "Higher Limit" value is also exceeded, only the red LED lights up.
Note:
This function is only available in the measuring modes RT, PK and Save. If the "Stop Force"
function is activated, no LED or only the green LED will light up, depending on the setting.
