© PCE Instruments
6
6.3.1
Factory settings
If the meter has been reset as described in 6.3 Settings, the language will automatically change
to Chinese. To change the menu language back to English, switch on the meter, press the "SET"
key twice, select the second last setting item and press the "SET" key again.
6.4
Export of measurement data "PDF" (PCE-MPC 25 only)
Open the "PDF" view by repeatedly pressing the "SET" key. To export the recorded measurement
data, first select "Export PDF". The recorded data is then combined into a PDF file. Then connect
the meter to a computer and select "Connect to USB" in the device to connect to the computer.
On the computer, the meter is then displayed as a mass data storage device and the PDFs can
be downloaded.
Via "Formatted Disk", the mass data memory can be cleared. This has no effect on the currently
recorded measurement data.
To return to the selection of views, go back to the "Shift" button with the arrow keys.
7
Battery
The current battery charge can be read from the batterry level indicator. If the battery is flat, it
must be replaced or charged via the Micro-USB interface. A 5 V DC 2 A power source should be
used to charge the battery.
To replace the battery, first switch off the meter. Then open the battery compartment on the back
and replace the battery. Ensure correct polarity.
8
Contact
If you have any questions, suggestions or technical problems, please do not hesitate to contact
us. You will find the relevant contact information at the end of this user manual.
9
Disposal
For the disposal of batteries in the EU, the 2006/66/EC
directive of the European Parliament
applies. Due to the contained pollutants, batteries must not be disposed of as household waste.
They must be given to collection points designed for that purpose.
In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use
them or give them to a recycling company which disposes of the devices in line with law.
For countries outside the EU, batteries and devices should be disposed of in accordance with
your local waste regulations.
If you have any questions, please contact PCE Instruments.
